# Makefile.in generated by automake 1.11 from Makefile.am.
# lib/perl/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



#
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements. See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership. The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied. See the License for the
# specific language governing permissions and limitations
# under the License.
#

pkgdatadir = $(datadir)/thrift
pkgincludedir = $(includedir)/thrift
pkglibdir = $(libdir)/thrift
pkglibexecdir = $(libexecdir)/thrift
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = arm-unknown-linux-gnu
host_triplet = arm-unknown-linux-gnu
subdir = lib/perl
DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/aclocal/ax_boost_base.m4 \
	$(top_srcdir)/aclocal/ax_javac_and_java.m4 \
	$(top_srcdir)/aclocal/ax_lib_event.m4 \
	$(top_srcdir)/aclocal/ax_lib_zlib.m4 \
	$(top_srcdir)/aclocal/ax_signed_right_shift.m4 \
	$(top_srcdir)/aclocal/ax_thrift_internal.m4 \
	$(top_srcdir)/aclocal/libtool.m4 \
	$(top_srcdir)/aclocal/ltoptions.m4 \
	$(top_srcdir)/aclocal/ltsugar.m4 \
	$(top_srcdir)/aclocal/ltversion.m4 \
	$(top_srcdir)/aclocal/lt~obsolete.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
	distdir
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
ACLOCAL = ${SHELL} /home/alexr/workspace/SRCLIB/thrift-0.2.0/missing --run aclocal-1.11
ALLOCA = 
AMTAR = ${SHELL} /home/alexr/workspace/SRCLIB/thrift-0.2.0/missing --run tar
ANT = 
ANT_FLAGS = 
AR = ar
AUTOCONF = ${SHELL} /home/alexr/workspace/SRCLIB/thrift-0.2.0/missing --run autoconf
AUTOHEADER = ${SHELL} /home/alexr/workspace/SRCLIB/thrift-0.2.0/missing --run autoheader
AUTOMAKE = ${SHELL} /home/alexr/workspace/SRCLIB/thrift-0.2.0/missing --run automake-1.11
AWK = gawk
BOOST_CPPFLAGS = 
BOOST_LDFLAGS = 
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2
CLASSPATH = 
CPP = gcc -E
CPPFLAGS = 
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /scratchbox/tools/bin/grep -E
ERLC = 
EXEEXT = 
FGREP = /scratchbox/tools/bin/grep -F
GREP = /scratchbox/tools/bin/grep
INSTALL = /scratchbox/tools/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
JAVA_PREFIX = /usr/local/lib
LD = /scratchbox/compilers/cs2007q3-glibc2.5-arm7/arm-none-linux-gnueabi/bin/ld
LDFLAGS = 
LEX = flex
LEXLIB = -lfl
LEX_OUTPUT_ROOT = lex.yy
LIBEVENT_CPPFLAGS = 
LIBEVENT_LDFLAGS = 
LIBEVENT_LIBS = 
LIBOBJS = 
LIBS = -lssl -lrt -lpthread 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
MAKEINFO = ${SHELL} /home/alexr/workspace/SRCLIB/thrift-0.2.0/missing --run makeinfo
MKDIR_P = /scratchbox/tools/bin/mkdir -p
MONO_CFLAGS = 
MONO_LIBS = 
NM = /scratchbox/compilers/bin/nm -B
NMEDIT = 
OBJDUMP = objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = thrift
PACKAGE_BUGREPORT = 
PACKAGE_NAME = thrift
PACKAGE_STRING = thrift 0.2.0
PACKAGE_TARNAME = thrift
PACKAGE_VERSION = 0.2.0
PATH_SEPARATOR = :
PERL = 
PKG_CONFIG = /scratchbox/tools/bin/pkg-config
PYTHON = 
PYTHON_EXEC_PREFIX = 
PYTHON_PLATFORM = 
PYTHON_PREFIX = 
PYTHON_VERSION = 
PY_PREFIX = /usr
RANLIB = ranlib
RSPEC = 
RUBY = 
SED = /scratchbox/tools/bin/sed
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip
VERSION = 0.2.0
YACC = bison -y
YFLAGS = 
ZLIB_CPPFLAGS = 
ZLIB_LDFLAGS = 
ZLIB_LIBS = -lz
abs_builddir = /home/alexr/workspace/SRCLIB/thrift-0.2.0/lib/perl
abs_srcdir = /home/alexr/workspace/SRCLIB/thrift-0.2.0/lib/perl
abs_top_builddir = /home/alexr/workspace/SRCLIB/thrift-0.2.0
abs_top_srcdir = /home/alexr/workspace/SRCLIB/thrift-0.2.0
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = arm-unknown-linux-gnu
build_alias = 
build_cpu = arm
build_os = linux-gnu
build_vendor = unknown
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = arm-unknown-linux-gnu
host_alias = 
host_cpu = arm
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /home/alexr/workspace/SRCLIB/thrift-0.2.0/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
lt_ECHO = echo
mandir = ${datarootdir}/man
mkdir_p = /scratchbox/tools/bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgpyexecdir = 
pkgpythondir = 
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
pyexecdir = 
pythondir = 
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target_alias = 
top_build_prefix = ../../
top_builddir = ../..
top_srcdir = ../..
SUBDIRS = test
EXTRA_DIST = \
	Makefile.PL \
	test.pl \
	lib/Thrift.pm \
	lib/Thrift.pm \
	lib/Thrift/BinaryProtocol.pm \
	lib/Thrift/BufferedTransport.pm \
	lib/Thrift/FramedTransport.pm \
	lib/Thrift/HttpClient.pm \
	lib/Thrift/MemoryBuffer.pm \
	lib/Thrift/Protocol.pm \
	lib/Thrift/Server.pm \
	lib/Thrift/Socket.pm \
	lib/Thrift/Transport.pm

all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign lib/perl/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign lib/perl/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-local
check: check-recursive
all-am: Makefile all-local
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-exec-local

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am:

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) check-am \
	ctags-recursive install-am install-strip tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am all-local check check-am check-local clean \
	clean-generic clean-libtool clean-local ctags ctags-recursive \
	distclean distclean-generic distclean-libtool distclean-tags \
	distdir dvi dvi-am html html-am info info-am install \
	install-am install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-exec-local \
	install-html install-html-am install-info install-info-am \
	install-man install-pdf install-pdf-am install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
	uninstall uninstall-am


Makefile-perl.mk : Makefile.PL
	$(PERL) Makefile.PL MAKEFILE=Makefile-perl.mk INSTALLDIRS=$(INSTALLDIRS)

all-local: Makefile-perl.mk
	$(MAKE) -f Makefile-perl.mk
	find blib -name 'Makefile*' -exec rm -f {} \;

check-local:
	$(PERL) -Iblib/lib -I/home/alexr/workspace/SRCLIB/thrift-0.2.0/lib/perl -I./test/gen-perl \
		/home/alexr/workspace/SRCLIB/thrift-0.2.0/lib/perl/test.pl /home/alexr/workspace/SRCLIB/thrift-0.2.0/lib/perl/test/*.t

install-exec-local: Makefile-perl.mk
	$(MAKE) -f Makefile-perl.mk install DESTDIR=$(DESTDIR)/

clean-local:
	if test -f Makefile-perl.mk ; then \
		$(MAKE) -f Makefile-perl.mk clean ; \
	fi
	rm -f Makefile-perl.mk.old

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
