%RED% Instructions for Windows Platform %ENDCOLOR%

---++++ Changing the status of a network

   1. Pre: no network access points are connected to; a WLAN is available eg:
      * Start Menu -> Settings -> Network Connections
      * Select the *Wireless Network Connection* from the list
      * Right mouse click, select *Properties* , select *Wireless Network* tab
      * For any configured WIFI network select and click *Remove* button       
   1. Pre: no LAN is connected to (unplug LAN cable) 
   1. Run the bearercloud application
   1. Verify the cloud space is clear of WIFI networks
   1. Verify the LAN network is displayed in the second from inner/*Discovered* circle in bearercloud
   1. Enable a new Wireless Access Point via one of the following:
      * turn on wireless access point
      * insert  Wireless Lan USB adaptor
      * use function key on Laptop to enable Wireless hardware
   1. Open Start Menu -> Settings -> Network Connections
   1. Select the *Wireless Network Connection* from the list
   1. Right click and *View available Wireless Networks*
   1. using the *Wireless Network Connection* control panel mentioned in earlier step
      * select an WIFI interface
      * configure it with the correct details
   1. Verify the new WIFI network is displayed in the innermost/*Active* circle in bearercloud
   1. Connect the LAN cable
   1. Verify the LAN network is displayed in the innermost/*Active* circle in bearercloud
   1. using the *Wireless Network Connection* control panel mentioned in earlier step
      * select an WIFI interface
      * click *Disconnect*
   1. Verify the new WIFI network is now displayed in the second from inner/*Discovered* circle in bearercloud
   1. Disable the network device (eg. unplug the access point)
   1. Verify that bearercloud shows the network moves to outermost/*Undefined*  circle in bearercloud
   1. Disconect the LAN cable
   1. Verify the LAN network is now displayed in the second from inner/*Discovered* circle in bearercloud