---+++ Symbian Platforms

---++++ Enumeration of connections

   1. On an S60 device, use Menu->Settings->Connectivity settings application to list visible networks
   1. Run the bearermonitor example application
   1. Press 'Scan'
   1. Verify all previously listed networks are shown in the application view

---++++ Adding and removing networks

---+++++ Added network interfaces

   1. Pre: no network access points are defined on the device; a WLAN is available
   1. Run the bearercloud application
   1. Verify the cloud space is clear of networks
   1. Press the Menu key to background the application
   1. Open Settings -> Connectivity -> Wireless networks
   1. Select the WLAN from the list
   1. Press Connect
   1. Press the Menu key
   1. Select the bearercloud application to foreground it
   1. Verify the new network is displayed in the circle

---+++++ Removed network interfaces

   1. Pre: Added network interfaces has been executed successfully
   1. Run the bearercloud application
   1. Verify the cloud space shows a network in the green circle
   1. Press the Menu key to background the application
   1. Open Settings -> Connectivity -> Destinations -> Uncategorised
   1. Select the WLAN from the list
   1. Press Options -> Delete, and then Yes in the confirm dialog
   1. Press the Menu key
   1. Select the bearercloud application to foreground it
   1. Verify the new network is not displayed in the circle

---++++ Changing the status of a network

   1. Pre: no network access points are defined on the device; a WLAN is available
   1. Run the bearercloud application
   1. Verify the cloud space is clear of networks
   1. Press the Menu key to background the application
   1. Open Settings -> Connectivity -> Wireless networks
   1. Select the WLAN from the list
   1. Press Connect
   1. Press the Menu key
   1. Select the bearercloud application to foreground it
   1. Verify the new network is displayed in the green circle (connected)
   1. Press the Menu key to background the application
   1. Open Settings -> Connectivity -> Connection Mgr
   1. Select the WLAN from the list
   1. Press Options -> Disconnect
   1. Press the Menu key
   1. Select the bearercloud application to foreground it
   1. Verify the new network is now displayed in the blue circle (disconnected)
   1. Disable the network device (eg. unplug the access point)
   1. Verify that bearercloud shows the network moves to the grey circle (unavailable)

---++++ Interfaces are used in order of priority

   1. Pre: GPRS is available to the device
   1. Pre: WLAN is available to the device

   1. Press the Menu key
   1. Select Settings->Connectivity->Destinations
   1. Select Option->New Destination, enter a name
   1. Select a picture
   1. Select the destination
   1. Select Option->New access point
   1. Select Yes
   1. Verify that the WLAN "x networks avail." is greater than 0
   1. Select Wireless LAN
   1. Select the test WLAN (and enter a key if necessary)
   1. Select Option->New access point
   1. Select Yes
   1. Select Packet data
   1. Enter a name and commit
   1. Press Back
   1. Select Options->Default connection
   1. Select the new Destination
   1. Verify the Destination has a check mark
   1. Start the bearermonitor example application
   1. In the list, select the new Destination
   1. Verify 'Roaming' is shown as 'Available'
   1. Move the device into an area not covered by the WLAN (or simulate an uncovered environment)
   1. Verify the application indicates loss of WLAN network (may take 1 - 2 minutes)
   1. Verify the application indicates a change of bearer to the GPRS network (may take 1 - 2 minutes)
   1. Move the device into (or simulate) the area covered by both networks
   1. Verify the device connects to the network using the WLAN bearer

